Customized Shaft Machining VTC

VTC 315 DS

  • Workpiece dia., max.: 240 mm | 9.5 in
  • Workpiece length, max.: 700 mm | 27.5 in
  • Chuck dia., max.: 315 mm | 12.5 in

CNC Machine for Grinding Shafts with Demanding Geometries

The VTC 315 DS CNC machine accommodates all the variations of process integration for shaft components including turning, hard turning, scroll-free turning, simultaneous grinding and synchronous support grinding as well as the combination of turning and grinding.

VTC 315 DS – Equipped with Various Technologies for Shaft Production

With the VTC 315 DS machine, EMAG provides vertical and simultaneous shaft grinding. In contrast to the standard method, this CNC machine holds the workpiece vertically for simultaneous, four-axis machining by two opposing grinding spindles. The normal forces are canceled out and grinding times for components such as gear shafts with multiple bearing seats can be drastically reduced. When used for synchronous support grinding, the resulting tangential forces that act on the shaft are absorbed by a movable support axis, so even thin workpieces with high infeed rates can be machined.

Both turning and grinding technologies can be used on the VTC 315 DS. The turret can perform turning and milling operations while grinding is located at the second station. Complete shaft production is made possible with cylindrical bearing seats, shoulders and grooves all machined in a single setup. Runout errors are drastically reduced in comparison with machining in separate setups.

As an extremely fast hard machining method, EMAG scroll-free turning ensures maximum productivity for workpieces up to 700 mm in size. Thanks to scroll-free turning, the multi-functional machine enables seal seat machining with the crucial requirement of no tool marks. Dry machining is also possible.

Advantages VTC 315 DS

  • All hard machining processes on a single machine: CBN grinding, hard turning and scroll-free turning
  • Integrated loading and unloading: the EMAG turret reduces the cost for automation and peripherals. Raw-part and finished component storage are integrated into the machine
  • Tailstock and steadies are CNC controlled. Set-up and resetting times are reduced
  • Shafts are hard complete-machined, eliminating re-clamping errors
  • The vertical construction of the machine provides ideal chip flow conditions and prevents the build-up of chip clusters
  • The compact, vertical construction also creates a small footprint
  • The machine can be accessed and operated with ease, this ensures that set-up and restooling times are minimized

Technical Data

Workpiece dia., max.

240 mm

9.5 in

Workpiece length, max.

700 mm

27.5 in

Chuck dia., max.

315 mm

12.5 in

Workpiece dia., max. mm
in
240
9.5
Workpiece length, max. mm
in
700
27.5
Chuck dia., max. mm
in
315
12.5
X-axis travel mm
in
390
15.5
Z-axis travel mm
in
950
37.5

Downloads

We have the right solution for you!

We're here for you

Do you have questions or need more detailed information? Please contact us!

To contact

EMAG worldwide

EMAG provides a worldwide service network. You benefit from our speed and global branch offices.

Locations & Contact

EMAG Newsletter

Subscribe to our newsletter now and receive information about our machines, technologies and webinars.

Subscribe now!

Workpieces

The Right Manufacturing Solution for Every Workpiece

Technologies

Complex Manufacturing Systems from a Single Source thanks to a High Range of Technologies

Finding the right balance between flexibility and productivity is challenge of designing machines for cylindrical grinding.

This demand is met with…

More information

The combination of a number of processes – such as hard turning and grinding – on a single machine, allows for the exploitation of considerable…

More information

The synchronous support grinding process on the VTC 315 DS uses two CBN grinding wheels to simultaneously grind – from opposite sides – vertically…

More information