Horizontal Hobbing Machine with Integrated Chamfering Unit for Maximum Productivity
The special basic design with its “virtual Y-axis” unites an extraordinary hob head swivel range with latest drive technology.
In addition to spur and helical gears, efficient worm machining processes by means of the single index milling method with disc cutters is also possible.
The machine covers an incomparable wide workpiece range thanks to its huge axe distance between workpiece and cutter spindle. In case of hobbing applications, the workpiece range goes from small pinions, DP 48, diameter less ½ inch up to DP6 diameter 3 inches.
The use of direct driven, water-cooled workpiece and tool spindles guarantees long tool life.
Short changeover times are possible by using optional quick clamping devices in small batch production as well as in serial production.
Depending on the workpiece range and the desired autonomy there is a wide selection of automation solutions spanning from manually loaded machines to stand-alone machines with automation up to fully integrated machines and machining systems.
|Workpiece dia., max.|| mm|
| 150 |
|Workpiece length, max.|| mm|
| 500 |
|Shift distance|| mm|
| 220 |
|Hobbing diameter, max.|| mm|
| 120 |
|Torque, max.|| Nm|
| 140 |
|Main spindle: Speed, max.||rpm||4,000|
|Hobbing speed, max.||rpm||4,000|
- Unique workpiece range from pinions, shafts and gears over wormgears and worms
- The “virtual Y-Axis” realizes a hob head swivel angle of 180° and 220mm shifting range at the same time
- Latest drive technology with outstanding performance factors for high performance machining
- Attractive cost-performance ratio