The geometry set is ideal for a preventive inspection of the machine within the shortest time

The geometry set provides you with all tools, measuring instruments and special-purpose tools for checking the geometry after a collision or a tool breakage at the machine. The geometry set is also at hand at all times for preventive maintenance.


For checking and restoring the tool carrier geometry

To be able to ensure that the high quality requirements relating to production and availability are met, the maintenance of machine tools is essential.

One of the most important checks applies to the geometry of the machine. Geometry errors can result in unacceptably high forces being applied to the drive elements, which can lead to the premature failure of complex subassemblies, such as tool drive, slide guides, feed drives or ball screw. Therefore, the regular and preventive inspection and recovery of the tool carrier geometry but also of the entire machine geometry is one of the most important prerequisites for production without any loss in quality and for protection against consequential damage. We have compiled the geometry set for this inspection, and also for the prescribed maintenance of the tool carrier and the machine’s geometry.

The geometry set can either be purchased or acquired as a service for the alignment of the machine’s geometry.


  • Higher availability of the machine due to preventive inspections and the avoidance of component failures
  • Fast servicing after a tool breakage or collision
  • All necessary aids are ready at hand
  • Reduction of servicing work, as the machine geometry can be checked promptly and in a preventive manner and be restored
  • The set price is 30% cheaper than the individual components
  • Optional: Training for the professional application of the geometry set by the EMAG ServicePlus experts



Request offer

You have questions or need detailed information? Please contact us!

I may withdraw my consent at any time. This can be done by an informal note to: EMAG GmbH und Co KG, Austraße 24, 73084 Salach, Germany or

* Field must be filled

Technical Hotline

Our technical hotline records all inquiries and gives you technical assistance in problem solving.

+49 7162 17-4300 

EMAG Worldwide

EMAG provides a worldwide service network. You benefit from our speed and global networking.


Do you have questions?

Whether you have inquiries about machines, service or maintenance. We are here for you worldwide.

Inquiry form