VL modulaire

Un concept qui garantit d’augmenter les performances de production : les machines de la gamme VL sont des tours verticaux peu encombrants avec automatisation intégrée.


Aperçu : Tours modulaires de la série VL

(5) machines trouvées

    [Translate to French (4):]
    • Ø max. de la pièce: 100 mm | 4 in
    • Longueur maxi. de la pièce: 150 mm | 6 in
    • Passage du mandrin max.: 160 mm | 6.5 in
    [Translate to French (4):]
    • Ø max. de la pièce: 150 mm | 6 in
    • Longueur maxi. de la pièce: 110 mm | 4.5 in
    • Passage du mandrin max.: 210 mm | 8.5 in
    [Translate to French (4):]
    • Ø max. de la pièce: 200 mm | 8 in
    • Longueur maxi. de la pièce: 200 mm | 8 in
    • Passage du mandrin max.: 260 mm | 10 in
    [Translate to French (4):]
    • Ø max. de la pièce: 300 mm | 12 in
    • Longueur maxi. de la pièce: 250 mm | 10 in
    • Passage du mandrin max.: 400 mm | 15.5 in
    • Ø max. de la pièce: 400 mm | 15.5 in
    • Longueur maxi. de la pièce: 300 mm | 12 in
    • Passage du mandrin max.: 500 mm | 19.5 in

    EDNA IOT-READY EX-WORKS: Get started with data-optimized production with VL series

    Using data analysis, unnecessary downtimes – due to component wear or, in the worst case, due to the failure of a machine – can be reduced or even avoided entirely. Productivity increases of over 10% are the rule here. To make entering the world of data-optimized production as easy as possible for our customers, all the machines of the VL Series now come standard in an IoT-ready state. This means that data analysis on the machines can be started virtually immediately.

    More information about IoT Ready
    The turret of the VL 2 turning machine is located below the working spindle and can hold up to twelve turning or driven tools.

    Highlights of the VL Series of Modular Turning Machines

    • Consistent vertical model families with modular design ensure a large range of versions
    • Ideal for medium and large scale production
    • Every machine features the full range of automation and handling technologies.
    • Designed for manual loading, but also easy to automate
    • Suitable for operation of multiple machines

    The Benefits of the VL Series of Modular Turning Machines

    • Machining of chucked parts = Standard machine concept
    • Small footprint (chaku-chaku or close linear arrangement) = Reduced floor space costs, more possibilities for the machine layout
    • Possibility of simple interlinking via central feeding and discharge belts and pick-and-place unit/changer = flexible as regards to future developments, lower automation costs, and shorter tooling times
    • Integrated automation = No additional costs (interface, etc.)
    • Short transport distances = Optimization of idle times
    • Common parts strategy, standard spare parts warehousing = Lower maintenance costs
    • Ease of operation (extremely accessible machining area) = Quicker machine set-up
    • High energy efficiency = Reduction in energy costs