Of utmost precision and highly productive: laser welding in “Transmission Manufacture 2.0“

11/28/2012 - Oliver Hagenlocher

From Dual-Clutch Transmission to the classic differential: modern transmission...


From Dual-Clutch Transmission to the classic differential: modern transmission technology is a pivotal research sector in the automotive industry. With new materials and altered geometries designers optimise the functionality of the different gearwheels. Furthermore, these wheels are required in ever larger quantities owing to the fact that the number of speed-gears in many passenger cars is on the increase. The innovations that promote the effectiveness of the production processes being applied include, for example, laser welding. With their ELC series of machines, the specialists at EMAG have developed integrated solutions for the application of processes with high output rates. The company’s in-depth knowledge of the production processes used for many transmission components, has added to its competency.

A first glance at a typical transmission component makes it plain where the challenges lie: even a small wheel with integrated synchronous gear represents a relatively complex design. To manufacture it efficiently and at the highest precision calls for the two different parts to be produced separately and subsequently joined in a joining+welding process. It is at this point in modern transmission manufacture that laser welding comes into its own”, explains Dr Andreas Mootz, Managing Director of EMAG Automation. “The process allows you to concentrate a carefully dosed amount of the energy emitted by the laser beam on the welding point, minimising possible warping, whilst still  achieving high welding speeds.“ Furthermore, the welding process from EMAG uses solid-state lasers of outstanding energy efficiency. Whereas a classic carbon dioxide laser will achieve an efficiency factor of just about eight percent, the EMAG specialists can rely on an efficiency factor of approximately 20 percent with their technology. In other words: the power used to achieve the same optical performance is noticeably less, with energy costs in the production department massively reduced.

Stationary welding device scores heavily
Similarly effective within the total process is the integration of different production sequences on the ELC system. For starters, the work spindle uses the pick-up principle to load itself. The components involved are then clamped and pressed together in the joining press. The clamping technology used ensures the highly accurate positioning of the components, providing ideal conditions for the welding process. The design of the stationary optic ensures great operating safety and optimal stability of both machine and welding process. Dependent on workpiece or material, the components can be induction-preheated prior to the welding process and brushed after it – and whatever is required, the process is completed in a single setup. The complete joining+welding process for a gearwheel takes just 12 seconds. This ensures that the components for a differential are thus finish-welded within no more than 40 seconds.

Laser welding leads to advances in light-weight construction
The differential housing as an example clearly shows the possibilities the laser welding technology opens up in the general development of vehicle production. For some time now, automotive companies have been replacing the screw-type connection between differential housing and crown gear with a welding seam. The result: the cost of materials reduces and the weight of the assembly falls by approximately 1.2 kg. “When looking at the advances made in light-weight construction in the automotive industry, these kind of savings mean the world”, explains Dr Mootz.

The customer benefits from practical knowledge
Seen in context, the welding specialists from Heubach, Germany are able to look back on a truly impressive history of success. Over 50 ELC systems have been sold in the last decade. All leading automobile manufacturers are using them. EMAG is the world leader in solid-state laser systems for the production of transmission and powertrain components. How did this success come about? “It is of decisive importance that we have at our disposal a large reservoir of know-how in the manufacture of these components. We know the whole of the manufacturing process, from turning and grinding, and from welding right up to the concluding ultrasound testing process”, emphasises Dr Mootz. “We can develop and construct the whole of the process chain. This massively simplifies the planning of new production sites and the expansion of existing ones.“

General market development is positive
The general market development does play into the hands of the German machine builder: It is not only the successful dual-clutch transmission that ensures the need for more gears. Conventional transmission systems too tend to have more speed gears, as this reduces petrol consumption and improves the driving comfort. “Having said that, we are offering a well proven welding technology that provides an energy-saving, high-precision manufacturing process and, at the same time, helps to advance light-weight construction and reduce production costs. This is no doubt a very successful and persuasive combination”, concludes Dr Mootz.

Contact

Oliver Hagenlocher

Press and publishers

Phone:+49 7162 17-267
Fax:+49 7162 17-199
E-Mail:communications@emag.com

Images