Dual-spindle turning center for highly efficient production of workpieces with diameters up to 75 mm.
The VL 1 TWIN / VLC 50 TWIN is equipped with two main spindles in one machining area that are able to machine two identical workpieces simultaneously. This results in a substantial increase in output quantities and lower unit cost. The diameter and length of the two workpieces can be adjusted independently by means of the two spindles. The machine is also equipped with a direct distance measuring system and an X-axis linear motor for maximum machining quality and productivity.
Machine bed made of MINERALIT® with optimum vibration-damping properties, size 45 recirculating roller guide rails, and a direct X-distance measuring system for maximum continuous positioning accuracy and repeatability.
Integrated automation system
Two pick-up working spindles for loading and unloading. “Automation ready”: Interlinking with other EMAG machines via TrackMotion automation system
Unique TWIN concept
Simultaneous machining of two identical workpieces possible, thus double output and reduction of the unit costs. The diameter and length (X/Z directions) of the two workpieces can be adjusted independently by means of the two spindles.
Linear drive in the X axis for maximum dynamics, (1 g acceleration) minimum wear and maximum positioning accuracy.
Measuring – fully integrated in the process
Optional measuring stations are available outside the machining areas. The measuring stations are arranged between the machining areas and the pick-up stations. Measuring is thus carried out in a time-saving manner on the way to loading/unloading.
|Workpiece dia., max.|| mm|
| 75 |
|Chuck dia., max.|| mm|
| 140 |
|Workpiece length, max.|| mm|
| 75 |
|Swing diameter|| mm|
| 160 |
|X-axis travel|| mm|
| 600 |
|Z-axis travel|| mm|
| 200 |
|Main spindle: Power rating at 40 % / 100 % duty cycle|| kW|
| 13 / 11.5 |
17.5 / 15.5
|Main spindle: Torque at 40 % / 100 % duty cycle|| Nm|
| 113 / 88 |
83.5 / 65
|Main spindle: Speed, max.||rpm||6,000|
- Machine base made of polymer concrete, MINERALIT®
- Slide unit (X axis)
- Direct distance measuring system in X axis
- Spindle unit (Z axis)
- Chip catcher
- Tool turret for 2x4 tools, VDI30 or BMT45
- Automation belt OP 10 / OP 10
- Linear motor (secondary element) in X