HLC 150 H brochure_EN.pdfDownload
Horizontal Hobbing Machine with Integrated Chamfering Unit for Maximum Productivity
The new HLC 150 H stands out for its numerous innovations and covers a unique spectrum of production applications.
Steering gears or shafts, straight, angled, or worm gearing – the HLC 150 H puts the full expertise of EMAG KOEPFER at the user’s disposal. This unique machine is complemented by a device for the chamfering and deburring of components during loading and unloading without interrupting operation. As a result, it offers perfect gear-cutting, short cycle times, and minimum cost.
Transmission shaft machining by hobbing and chamfering free of secondary burrs
After rough-machining the gears in a first step, the gearing is deburred. The finish is applied during the second hobbing step. The result is a burr-free, chamfered gear.
|Workpiece diameter, max.|| mm|
| 150 |
|Workpiece length, max.|| mm|
| 500 |
|Shift distance|| mm|
| 220 |
|Hobbing diameter, max.|| mm|
| 120 |
|Torque, max.|| Nm|
| 140 |
|Main spindle: Speed, max.||rpm||4,000|
|Hobbing speed, max.||rpm||4,000|
- Unparalleled range of application for pinions, shafts, gears, worm gears, and screws
- Integrated chamfering technologies
- Drive technology with outstanding performance data for high-performance machining
- Proven value for the investment