• VLC 50 TWIN
  • VL 3 DUO
  • VSC DUO
  • VSC TWIN
  • VSC TRIO
Hide machine menu
VLC 50 TWIN

VLC 50 TWIN – highly productive simultaneous machining

With the VLC 50 TWIN machines, the working spindles are used not only for machining workpieces but also for loading and unloading them. This saves money, space and unnecessary peripherals.

read more

Dual-spindle turning center for highly efficient production of workpieces with diameters up to 75 mm.

The VLC 50 TWIN is equipped with two main spindles in one machining area that are able to machine two identical workpieces simultaneously. This results in a substantial increase in output quantities and lower unit cost. The diameter and length of the two workpieces can be adjusted independently by means of the two spindles. The machine is also equipped with a direct distance measuring system and an X-axis linear motor for maximum machining quality and productivity.

Maximum precision

Machine bed made of MINERALIT® with optimum vibration-damping properties, size 45 recirculating roller guide rails, and a direct X-distance measuring system for maximum continuous positioning accuracy and repeatability.

Integrated automation system

Two pick-up working spindles for loading and unloading. “Automation ready”: Interlinking with other EMAG machines via TrackMotion automation system

Unique TWIN concept

Simultaneous machining of two identical workpieces possible, thus double output and reduction of the unit costs. The diameter and length (X/Z directions) of the two workpieces can be adjusted independently by means of the two spindles.

Maximum dynamics

Linear drive in the X axis for maximum dynamics, (1 g acceleration) minimum wear and maximum positioning accuracy.

Measuring – fully integrated in the process

Optional measuring stations are available outside the machining areas. The measuring stations are arranged between the machining areas and the pick-up stations. Measuring is thus carried out in a time-saving manner on the way to loading/unloading.

Technical Data

Chuck diameter, max. mm
in
140
5.5
Workpiece diameter, max. mm
in
75
3
Workpiece length, max. mm
in
75
3
X-axis travel mm
in
600
23.5
Z-axis travel mm
in
200
8
Main spindle: Power rating at 40 % / 100 % duty cycle kW
hp
9.5 / 10
12.5 / 13.5
Main spindle: Torque at 40 % / 100 % duty cycle Nm
ft-lb
95 / 136
70 / 100.5
Main spindle: Speed, max. 1/min
rpm
6,000
6,000
Rapid-traverse rate X / Z m/min
ipm
80 / 30
3,150 / 1,181.5

Images / Videos

Advantages

  • Machine base made of polymer concrete, MINERALIT®
  • Slide unit (X axis)
  • Direct distance measuring system in X axis
  • Spindle unit (Z axis)
  • Chip catcher
  • Tool turret for 2x4 tools, VDI30 or BMT45
  • Automation belt OP 10 / OP 10
  • Linear motor (secondary element) in X

Workpieces Technologies

  • Workpieces
  • Technologies
Request

Request offer

You have questions or need detailed information? Please contact us!

Data protection information*
Contact*

I may withdraw my consent at any time. This can be done by an informal note to: EMAG GmbH und Co KG, Austraße 24, 73084 Salach, Germany or communications@emag.com.

* Field must be filled

We're here for you

Do you have questions or need more detailed information regarding this machine?

To contact

EMAG worldwide

EMAG provides a worldwide service network. You benefit from our speed and global branch offices.

Locations & Contact