• G 375 H
  • GR 250
  • G 500 H
  • GP 500 H
  • GR 500 H
  • GRX 500 H
  • GT 500 H
  • GW 3600 H
  • HRG 350
  • GS 400
기계 선택 숨기기
GP 500 H

Gear Profile Grinding GP 500 H

The GP 500 H is a profile grinding machine that mounts an additional NC axis, allowing you to work with two separate spindles instead of just one.

계속 읽기

Internal Grinding through Twin Spindle Principle

The EMAG SU GP 500 H gear profile grinding machine features an array of innovations and establishes at the same time the new improved base for all machines of the horizontal profile grinding machine of the EMAG SU G series.

The GP 500 H is a gear profile grinding machine that mounts an additional NC axis, allowing you to work with two separate spindles instead of just one. Both spindles can accommodate one grinding wheel or even two-wheel sets. Single gearings are roughed on the first spindle and finish ground on the second, with one grinding wheel mounted on each spindle. Two gearings on one shaft can be roughed and finished with wheel sets on each spindle without the need for tool changes.

Spindle variants are available with different power outputs and speeds for different grinding wheel sizes. Even internal gear manufacturing no longer requires tool change thanks to this new twin drive principle.

Now format changes are executed considerably faster than before. This is true for changes between external and internal grinding spindles as well, since simple adapter interfaces can be connected quickly and easily by the machine operator. The GP 500 H employs electroplated CBN or dressable corundum grinding wheels depending on the workpiece requirements, delivery time and batch size to be manufactured.

기술 데이터

Workpiece diameter, min. mm
in
500
19.5
Module, max. mn 0.5 – 15.0
Profile depth, max. mm
in
35
1.5
Workpiece length, max. mm
in
1,250
49
Centre dist. work spindle / tool spindle mm
in
15 / 380
0.5 / 15
Tool spindle power kW
hp
5.5 / 16
7.5 / 21.5
Ceramic wheel diameter mm
in
30 / 300
1 / 12
Grinding spindle speed, max. rpm 40,000
Workpiece weight, max. kg
lb
350
771.5
Machine weight, including standard equipment kg
lb
15,000
33,069.5

이미지/동영상

이점

  • Roughing and finishing in a single setup without the need for tool change
  • Profile grinding of gears, shafts with separate gearings, rotors, worms and screw-type workpieces
  • Internal grinding through twin spindle principle
  • Fast format changes via quick-change adaptors
  • Modular software
  • Automation with integrated checking possible
Request

Request offer

You have questions or need detailed information? Please contact us!

I may withdraw my consent at any time. This can be done by an informal note to: EMAG GmbH und Co KG, Austraße 24, 73084 Salach, Germany or communications@emag.com.

* Field must be filled

언제든 도와드릴 준비가 되어 있습니다.

이 기계에 대한 문의 사항이 있거나 상세 자료가 필요하십니까?

연락처

EMAG worldwide

EMAG에서는 전 세계 서비스 네트워크를 제공합니다. 당사의 글로벌 네트워킹과 빠른 서비스의 혜택을 누려 보십시오.

위치와 연락처