VL 2 – Vertical pick-up turning machines for the machining of workpieces with a maximum diameter of 100 mm

A stable machine structure, dynamic axes and ease of operation – these are the outstanding points of the vertical turning machines VL 2. They are based on a completely new machine concept. This makes it possible to use various production technologies for soft and hard machining in the machines while still providing very good value for money.

 

The vertical turning machines are fitted with a chuck with a diameter of 160 mm. This means that they can machine workpieces with a maximum diameter of 100 mm and a maximum length of 150 mm.

VL 2
VL 2 – Vertical Turning Machines
VL 2 – Vertical Turning Machines
A stable machine structure, dynamic axes and ease of operation – these are the outstanding points of the VL 2 vertical turning machines. They are based on a completely new machine concept. This makes it possible to use various production technologies for soft and hard machining in the machines while still providing very good value for money.

Three axes + turret with up to twelve driven tools + automation.

 

The basic VL 2 machine, a three-axis vertical chuck turning machine, catches the eye due to its design. Its basis is the machine body made of MINERALIT® polymer concrete. The working spindle is mounted on the front of the machine body on a compound slide which completes movements in the X- and Z-axes. The turret below the working spindle can hold up to twelve turning or driven tools.

Technical Data

Y-axis travel (optional) mm +/- 50
Chuck diameter, max. mm 160
X-axis travel mm 700
Z-axis travel mm 375
Workpiece dia., max mm 100
Workpiece length, max mm 150
Main spindle: Power rating at 40 % / 100 % duty cycle kW 19,5 / 12,5
Main spindle: Torque at 40 % / 100 % duty cycle Nm 75 / 48
Main spindle: Speed, max. m/min 6.000

Advantages

  • Simple automation concept = high availability
  • Integral automation, automatic workpiece changing
  • Short distances for machining and loading, and therefore very short part cycles
  • High strength and excellent damping thanks to the machine body made of MINERALIT® polymer concrete
  • Ideal chip flow conditions
  • Small footprint, 5 m² machine installation area
  • All service units are freely accessible
  • Simple tool changing, just 270 mm distance to tool turret

Contact / Request more information

Do you have questions or need detailed informations regarding this machine?

All vertical pick-up turning machines from EMAG have a machine base made of MINERALIT® polymer concrete which has eight times better damping properties than gray cast iron.

The high-speed, 12-station, disk-type turret of the vertical turning machines features very short swiveling times.