English
Standard vertical turning machine for chucked components: two-spindle vertical turning + automation
Vertical turning on the VL 2-P Vertical Turning Machine with pendular technology
The VL 2-P represents a comprehensive solution to vertical turning. This vertical turning machine can handle workpieces of up to 100 mm diameter, complete-machining them in two setups (using a variety of technologies, such as vertical turning, milling, drilling, …). The machine is equipped with two workspindles working in pendulum mode, i.e. whilst the first spindle holds the workpiece during the machining process, the second spindle utilises the pick-up method to automatically load itself with raw-parts. This ensures that the follow-on raw-part is always ready for vertical turning (machining). After completion of the vertical turning operation on the first component the turret swings (like a pendulum) to the second workspindle.
Vertical pick-up turning machine VL 2-P with pendulum technology
Vertical pick-up turning machine VL 2-P with pendulum technology
The VL 2-P is a two-spindle vertical turning machine with pendulum technology for parts with a diameter of up to 100 mm. The main focus in the design of the VL 2-P was clearly on reducing idle times. Non-productive times in the machine due to loading and unloading processes have been almost completely eliminated. The machine is ideal for workpieces with short machining times since the ratio of machining time to idle time is vital for the economy of the process.
Five axes + turret with up to twelve tools + automation + optional turnover station (on one side).
The VL 2-P is a two-spindle vertical turning machine with pendulum technology for the vertical turning of workpieces up to 100 mm in diameter. On the VL 2-P the workspindles are mounted to the left and right of the machine base and carry out the movement in Z. The turret is located at the front of the machine and moves in X. The focus during the creation of the VL 2-P design has been on reducing the non-productive times in vertical turning. With the VL 2-P non-productive times for loading and unloading work are almost totally eliminated. The vertical turning machine is perfect for the machining of workpieces with short cycle times, where the deciding factor in judging the efficiency level of the process is the ratio between machining and non-productive times.
Technical Data
| Chuck dia. | mm | 160 |
| Swing dia. | mm | 200 |
| X-axis travel | mm | 380 |
| Z-axis travel | mm | 660 |
Advantages
- Extremely short chip-to-chip time
- The VL 2-P can carry out follow-on operations (turning 1st side + turning 2nd side) and can also produce highly diverse workpieces
- Vibration damping and thermal stability thanks to machine base made of MINERALIT®
- Standardized automation modules ensure high flexibility
- Ideal chip flow conditions – chips fall down unhindered
- Small footprint due to compact design
- Loading of the main spindles parallel to machining
- The machining times of the two spindles may be different
Contact / Request more information
Do you have questions or need detailed informations regarding this machine?
